Product brief introduction

3003For AL - Mn alloy, is one of the most widely used antirust aluminum, this kind of the strength of the alloy is not high, slightly higher than that of industrial pure aluminum), can't heat treatment to strengthen, the cold working method is adopted to improve its mechanical properties: in annealing state has high plasticity, in a cold work hardening plasticity is good, when the cold work hardening plasticity is low, good corrosion resistance, good weldability, cutting performance is bad.
Purpose is mainly used for high plasticity and good weldability, working in a liquid or gas medium low load parts, such as tank, gas or oil duct, and other various liquid containers made of deep drawing parts: small load wire used for rivet 3003 aluminum sheet formability, dissolves, good corrosion resistance.
Used for processing and need to have good formability, high solderability good resistance to corrosion of parts, components, or both require these performance and needs to have more than 1 XXX alloy high strength work.

Product Parameter

Brand	Old Brand	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Zr	Element	Rest		Al
												Single	Totle
3003	—	0.60	0.70	0.05-0.20	1.0-1.5	—	—	0.10	—	—	—	0.05	0.15	Remain

Technical Equipment