Product brief introduction

Belonging to 6082 genera and strengthens the alloy heat treatment, with good formability and weldability, machinability and corrosion resistance, with moderate intensity at the same time, can still maintain a good operational after annealing, mainly for the mechanical structure, including bar, sheet, pipe and profile.
This kind of alloy has and mechanical properties of 6061 alloy is similar but not identical, its - T6 state has high mechanical properties.
Alloy 6082 is very commonly used alloy products in Europe, in the United States also has a high application, apply to

Alloy 6082 combines excellent weldability, brazing, corrosion resistance, formability and machinability.
Alloy 6082-0 and T4 condition suitable for bending and forming, its - T5 and T6 condition suitable for the requirements of good machinability, some specific processing need to use the chip separator separation or other special process to help chip;
6082 alloy usually has the very good processing properties and good anodic reaction performance;

Processing raw materials, seamless aluminum pipe, profiles and custom profiles structure etc.
6082 alloys generally have good processing property and good anodic reaction performance.
The most common anode reaction method includes removing impurities and dyeing, coating, etc.

Product Parameter

Brand	Old Brand	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Zr	Element	Rest		Al
												Single	Totle
6082	—	0.7-1.3	0.50	0.10	0.40-1.0	0.6-1.2	0.25	0.20	0.10	—	—	0.05	0.15	Remain

Technical Equipment