Product brief introduction
1. All kinds of corrosive medium of oxidation and reduction environment has very good corrosion resistance
2. Good pitting corrosion and crevice corrosion resistance, and won't produce chloride stress corrosion cracking
3. Excellent corrosion resistant to inorganic acid, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid and mixed acid of sulphuric acid and hydrochloric acid, etc
Product Parameter
% | Ni | Cr | Mo | Fe | C | Mn | Si | P | S | Co | Nb+Ta | Al | Ti |
Min | 58.0 | 20.0 | 8.0 | 3.15 | |||||||||
Max | 23.0 | 10.0 | 5.0 | 0.10 | 0.50 | 0.50 | 0.015 | 0.015 | 1.00 | 4.15 | 0.40 | 0.40 |
Technical Equipment
After softening annealing low-carbon alloy 625 is widely used in chemical process industries, good corrosion resistance and high strength make it can be used as the structure of the thinner parts.
625 alloy can be used in contact with the water and under the occasion of high mechanical stress.